Skip to content
Plant RegisterA service from PlanOps
Menu

Check sheets

Telehandler daily pre-use check sheet

The 18 checks an operator makes before using a telehandler each day, on one printable sheet that covers a week. Free to print and use, no account needed.

The telehandler daily pre-use check sheet: a week of checks, one column a day
Page one of the sheet. Download the PDF to print it.

The checks on the sheet

Fluids and engine

  1. Engine oil level

    Check the dipstick with the machine on level ground and the engine stopped for at least two minutes.

  2. Hydraulic oil level

    Check the sight glass with the boom lowered and retracted.

  3. Coolant level

    Check the header tank when cool. Never open a hot radiator cap.

Structure and load-handling

  1. Wheels and wheel-nuts secure

    All nuts present, visually tight, no signs of movement against the hub.

  2. Tyre condition and pressure

    No cuts, bulges, excessive wear. Pressures within manufacturer specification.

  3. Boom — condition of structure and wear pads

    No cracks, no weld damage, no excessive play between boom sections.

  4. Fork tines — condition and retention

    No cracks, no distortion, heels within wear limits, locking pins engaged.

  5. Outriggers / stabilisers deploy and retract correctly

Controls and safety devices

  1. General condition of bodywork and cab
  2. Seat belt is secure and in working order
  3. Handbrake holds the machine on a slope
  4. Travel (foot) brake — firm pedal, pulls up straight
  5. Steering and hydraulic controls respond correctly
  6. All lights (head, tail, work, brake, indicators) operational
  7. Cameras / mirrors intact, clean, and fully operational
  8. Horn operates
  9. Reversing alarm audible at 10 m
  10. Amber beacon flashing and visible

PUWER doesn’t itself require a daily check or a written record of one. HSE’s construction guidance does recommend daily checks for some plant, such as dumpers and MEWPs, and a written sheet is the easiest way to show the check was done and a defect was reported. A pre-use check is not the PUWER inspection or the LOLER thorough examination: those are separate, by a competent person, and recorded. What the law requires, with the sources.

These sheets are general guidance, not a substitute for the manufacturer’s instructions, your own risk assessment or a competent person’s inspection. Add anything the manufacturer or the hire company asks you to check.