Skip to content
Plant RegisterA service from PlanOps
Menu

Check sheets

Dump truck daily pre-use check sheet

The 15 checks an operator makes before using a dump truck each day, on one printable sheet that covers a week. Free to print and use, no account needed.

The dump truck daily pre-use check sheet: a week of checks, one column a day
Page one of the sheet. Download the PDF to print it.

The checks on the sheet

Visibility and vision aids

  1. Windscreen — clean and undamaged
  2. Mirrors — secure, clean, correctly adjusted
  3. Camera for all-round vision — intact, clean, fully operational
  4. Wipers and washers function correctly

Running gear

  1. Tyres — tread, sidewalls, pressures

    Check for worn tread, cuts and damage to side walls and tread.

Alarms and lights

  1. Reversing alarm working and audible at 10 m
  2. All lights operational (where applicable)

    Head, tail, brake, indicators and beacon(s).

Fluids and air

  1. Engine oil level
  2. Hydraulic oil level
  3. Air system — build-up, no leaks, tanks drained

    Air pressure builds to working range and holds. Drain condensate from tanks.

Brakes, steering and cab

  1. Footbrake and handbrake operate correctly

    Footbrake pulls up firm and straight; handbrake holds the machine on a slope.

  2. Steering responds correctly with no excessive play
  3. Seat belt is secure and in working order

Emergency equipment and periodic tests

  1. Fire extinguisher(s) — present, in date, sealed

    Correct type for vehicle, service date in date, tamper seal intact, gauge in green.

  2. SIMRET (fortnightly) or ramp / brake test (weekly) — carried out when due

    SIMRET fortnightly or a ramp / brake test weekly. Tick N/A on days when neither test is due.

PUWER doesn’t itself require a daily check or a written record of one. HSE’s construction guidance does recommend daily checks for some plant, such as dumpers and MEWPs, and a written sheet is the easiest way to show the check was done and a defect was reported. A pre-use check is not the PUWER inspection or the LOLER thorough examination: those are separate, by a competent person, and recorded. What the law requires, with the sources.

These sheets are general guidance, not a substitute for the manufacturer’s instructions, your own risk assessment or a competent person’s inspection. Add anything the manufacturer or the hire company asks you to check.