Skip to content
Plant RegisterA service from PlanOps
Menu

Check sheets

Mast climbing work platform daily pre-use check sheet

The 12 checks an operator makes before using a mast climbing work platform each day, on one printable sheet that covers a week. Free to print and use, no account needed.

The mast climbing work platform daily pre-use check sheet: a week of checks, one column a day
Page one of the sheet. Download the PDF to print it.

The checks on the sheet

Structure and integrity

  1. No evidence of tampering since last use

    Pay particular attention after weekends or holiday periods.

  2. Mast and ties sound and secure

    Check especially after severe weather. Ties fully engaged, fixings tight, no movement.

  3. No obstacles in platform pathway

    Nothing within the operation pathway that could cause hindrance or contact during travel.

Platform and edge protection

  1. Handrails and guards in position and secure

    Adjustments or replacements must be completed before operating the platform.

  2. Deck and scaffold boards — no damage
  3. Platform clear of debris and unwanted materials

    Remove loose items before operating — risk of falling objects.

Ground level and access

  1. Area below platform suitably fenced off

    Exclusion zone prevents anyone entering the drop area during operation.

  2. Area beneath base frame — condition

Signage and power

  1. Instruction notices and SWL sign in position and legible

    Includes the maximum safe working load (SWL) sign.

  2. Trailing power cable uncoiled and routed safely

    Cable must not be pinched, run over, or cause a trip hazard.

Function checks

  1. Up/down direction of travel is correct

    With the main switch turned on, confirm the platform travels in the expected direction.

  2. Gearbox — no signs of oil leaks

PUWER doesn’t itself require a daily check or a written record of one. HSE’s construction guidance does recommend daily checks for some plant, such as dumpers and MEWPs, and a written sheet is the easiest way to show the check was done and a defect was reported. A pre-use check is not the PUWER inspection or the LOLER thorough examination: those are separate, by a competent person, and recorded. What the law requires, with the sources.

These sheets are general guidance, not a substitute for the manufacturer’s instructions, your own risk assessment or a competent person’s inspection. Add anything the manufacturer or the hire company asks you to check.